Panel Line Systems and Solutions

Anthon: Throughfeed Saw Line PVL/PVQ

Panel Line Systems and Solutions

With the throughfeed saw line, PVL/PVQ, most panels like particle board, MDF, plywood, honeycomb panels, cement boards and fiberboards can be cut-to-size The throughfeed saw line PVL/PVQ can cut-to-size most panels such as particleboard, MDF, plywood, honeycomb panels, cement boards and fibre board. By using main and scoring saws, most different board coatings can be processed. The lateral adjustment of saw and hogger units is completely …

Anthon: LNB Pressure Beam Saw

Panel Line Systems and Solutions

The pressure beam saw, the LNB, has increased the cut height from 150 to 180mm Anthon has also thoroughly reviewed the pressure beam saw, the LNB. With an increase of cut height from 150 to 180 mm and an improved suspension of the saw blades and motors, a significant increase in performance can be achieved. Thus higher panel stacks can now be cut in a shorter cycle time. As a result of optimum torque pickup and low-maintenance tooth rack drive, …

Dieffenbacher CPS+: New Development for the Continuous Press

Panel Line Systems and Solutions

 Combining the best of both worlds: the New Dieffenbacher CPS+ Press The CPS+ combines two successful and proven concepts—CPS and ContiPlus—in a new, significantly improved press design. The performance and precision of the CPS+ will be further increased to make production of wood-based panels even more economical. In addition, ease of maintenance and operating comfort will also be improved. The new CPS was presented to the …

Electronic Wood Systems: Quality Control Systems and a new Spark Detection and Extinguishing System

Panel Line Systems and Solutions

The new generation of Spark Detection and Extinguishing System works with 30% less water by keeping its high efficiency using a newly designed spring loaded nozzle (patent pending) and requires 50% less cabling for installation. The system is approved by Factory Mutual. In addition the company displayed a new Blow Detection System on the booth. An attached Air Knife device produces an airstream below the panel which stabilises the ultrasonic …

GreCon FIBERVIEW

Panel Line Systems and Solutions

GreCon FIBERVIEW GreCon FIBERVIEW allows an economical and objective assessment of the fibre quality in the running process. The measured values supplied by FIBERVIEW enable the operator of the refiner to produce a consistent fibre quality. A saving potential of up to 10 kW/h per tonne of wood that is refined can be calculated. Being able to manipulate the fibre sizes in a determined and reliable way, MDF manufacturers are now able to produce …

GreCon: Following the Racing Line with the GreCon FORMATOR

Panel Line Systems and Solutions

GreCon FORMATOR: To reduce material fluctuations in forming to a minimumA constant material distribution in the mat is one of the most important pre-conditions for a consistent quality in MDF productions. The GreCon FORMATOR automatically reduces material fluctuations to a minimum in MDF panels, as well as within the individual panel via an automatic control process. This control process is based on the detection of material fluctuations before …

Siempelkamp Ecoresinator P: Up to 10% glue savings in particleboard production

Panel Line Systems and Solutions

The Ecoresinator P saves up to 10% glue Building on the success of the innovative Ecoresinator blender system for fibres, Siempelkamp has developed a novel blender for particleboard production: The Ecoresinator P. Up to 10% documented glue savings makes this system a sensible investment for new or proven plants.  Since Siempelkamp first introduced its novel Ecoresinator 2011 MDF blender at LIGNA, the system. It has been proven to save …

Subscribe to our newsletter